Products

Parafilm M sealing film

Sealing film made of polyolefines and paraffin waxes. Service temperature from –45 ºC up to +50 ºC (melting point +60 ºC). Resistant to saline solutions, most common inorganic acids and bases used in laboratory and some organics solvents (methanol, ethanol and 2-propanol). Not resistant to diethylether, chloroform, carbon tetrachloride, benzene or toluene.

More info

Kjeldahl digestion system, KJD10

Graphite digester with advanced high temperature infrared radiation heating technology, controlled platform and anti-oxidation treatment, corrosion-resistant design for long lasting life. Temperature range: RT + 5 °C to 450 °C, quick temperature rise (400 °C in 25 minutes), accuracy: ± 1 °C. Linear and curve temperature rise modes. Offers 20 digestion programs for control of temperature rise curves. Capacity: 20 positions of 300 ml tubes. 5,7 inch color screen, easy to use. The standard configuration includes a waste gas collection hood but must be combined with the KJDL-A01-001 exhausting system (not included) to condensate and neutralize the corrosive gas waste generated in the experiment. The KJDF1 exhausting system has a triple filtration system, avoids spilling or emptying and has adjustable suction pressure with a low noise, anticorrosion vacuum pump and a PTFE anticorrosion pipe design. Environmentally friendly. It is recommended to combine with the DTU3-042 -*** digestion tubes (10 tubes included) and the KJDL-CAT-250 catalyst tablets. High temperature alarm and overload protection. Power: 3600 W. 220 V ± 10%, 50 Hz. Warranty 1 year

More info

Rubber bulb for glass Pasteur pipettes

Made of natural latex rubber

More info

Receiving tube

Made of borosilicate glass LBG 3.3

More info

Distilling head

Made of borosilicate glass LBG 3.3

More info

Double angled adapter, male

Made of borosilicate glass LBG 3.3. Used in distillation assembly

More info

Anti-vibration table, INBAUTEK

The table is composed of two independent structures, one assembled inside another. The interior structure is made of cold rolled steel tube and finished in epoxy-polyester paint. This structure integrates the silentbock system on which four marble stones are placed to ensure the absence of vibrations. The surface is topped in compact phenolic Trespa Toplab, which will form the anti-vibration zone. The outer structure is also composed of cold-rolled steel and epoxy-polyester paint, on which falls the work surface of compact phenolic Trespa Toplab. As this structure is completely independent, the vibrations are not transmitted to the interior structure. Dimensions of the table: 900 x 750 x 900 mm. Includes a leveling system to save soil irregularities. Delivery time: 5-7 weeks

More info

Welded central laboratory table

Worktop made with high resistance compact phenolic resin Fundermax Resistance², soft grey, 20 mm thick. Ideal for all type of laboratories and indispensable in physical-chemical laboratories. Tube metal frame made of cold rolled steel 40 x 40 mm, with an antirust epoxy resin protection layer. Can be used as a support surface for laboratory instrumentation and experiment setup. With a maximum load capacity of 400 kg/linear meter. Four adjustable support points to level the table. Delivered assembled. Warranty 5 years. Delivery time 5-7 weeks

More info

Double table for laboratory ovens, incubators and furnaces

Table for furnaces, ovens and incubators. Two heights with a separation of 74 cm. Worktop made of high resistance compact phenolic resin Fundermax Resistance² soft grey, 20 mm thick. Ideal for all types of laboratories. Tube metal frame made of cold rolled steel 40 x 40 mm with an antirust epoxy resin protection layer. Four adjustable support points to level the table. With a maximum load capacity of 300 kg. Four adjustable support points to level the table. Delivered assembled. Warranty 5 years. Delivery time: 5-7 weeks

More info

High laboratory stool with footrest

Five feet, rotating seat. Seat material: Anti-slip polyurethane, easy to clean. Resistant to abrasion and cleaning products. Adjustable seat by gas lift: 54-85 cm. Diameter of the seat: 33 cm. With footrest of 45 cm diameter. Base: black polyamide with fiberglass, base diameter: 60 cm. Delivered unassembled. Warranty 1 year

More info

Cell strainer

Made of a strong nylon mesh with evenly spaced mesh pores. The extended lip on the strainer enables aseptic handling with forceps. Designed to fit standard 50 ml conical tubes. Individually packaged, sterilized by gamma irradiation. DNAse and RNAse free, non-pyrogenic. Certificate of sterilization included (to be downloaded free of charge here)

More info

Standard stackable laboratory sieves according ISO 3310/1

Manufactured with metal mesh in stainless steel AISI-316 compatible with all manufacturers. Conforms to ISO standards. With serial number and certificate of conformity according to the required standard

More info