<>Blanc-Labo S.A. your laboratory equipment specialist
Vacuum aspirator, ST20
Small and compact vacuum aspirator for liquid waste disposal. The handle operation is simple and flexible. Manual aspiration and continuous aspiration mode, reducing hand fatigue and improving efficiency. The hydrophobic filter prevents aerosol and liquids contamination. Brushless motor and low noise. Includes a 2 L bottle, 8-channel needle, and detrusion adapters for 200 μl and 1 ml tips and 8-channel 200 μl tips (tips not included). All parts in touch with the liquid flow can be autoclaved
More info
EASY 8 pipette pump filler
Made of ABS. With wheel and piston, for easy one-hand control of filling and delivery from any glass or plastic pipettes
More info
Digital burette, EASY 70
Volume range between 0,01 ml and 99,99 ml. The burette's momentum is motorized, which allows a precise and comfortable evaluation, supported by convenient bottle-top titration. Fully-digital controls on the parameters settings and burette process. Large LCD screen. All parameters can be set in the controller. Haves an extra interface to store and export experimental data. Max. piston lift is 10 ml. Each digital burette was individually calibrated according to EN-ISO 8655 standard. Warranty 2 years. Check the complete table of chemical compatibilities on our website www.labbox.com
More info
Electronic pipette filling device EASY 60+
For easy, secure and efficient liquid filling and delivery. An inner PTFE 0.45 μm filter and a security valve prevent any liquid entrance in the device. The cone fixing the pipettes is autoclavable up to 121 ºC. Can be used with glass or plastic pipettes from 0.1 to 100 ml. Easy to use, ergonomical and one-hand control. Wall hanger device, internal rechargeable battery, spare 0,45 μm PTFE filter and 0,2 μm filter included. Warranty 1 year
More info
Electronic pipette filling device EASY 60β
Ergonomic and lightweight design, easy to handle with one hand. For easy, secure and efficient liquid filling and delivery. Can be used with glass or plastic pipettes from 0.1 to 100 ml. Autoclavable hydrophobic 0.45 μm filter preventing excess aspiration. Warranty 2 years
More info
EASY 20R bottle top dispenser with recirculation
Excellent chemical resistance. Made of borosilicate glass and and high chemical resistance materials. High reproducibility of the measurements. Re-circulable valve that prevents liquid leaks. Security lock. Includes calibration tool and 4 universal adapters for bottles. Easy to clean and maintain due to a springless valve design. This instrument is designed for dispensing liquids, under the following conditions of use: temperature range: 15 to 40 °C (instrument and reagent), vapor pressure up to 500 mbar, density up to 2.2 g/cm³ and viscosity up to 500 mm²/s. Warranty 2 years. Each dispenser has been calibrated individually as per EN-ISO 8655. It has a unique serial number engraved and is delivered with a calibration certificate. Check the complete table of chemical compatibilities on our website www.labbox.com
More info
Bottle top dispenser , 20K
Good chemical resistance. Made of PTFE, 3.3 borosilicate glass, polypropylene and FEP. High reproducibility of the volumes. The instrument can be screwed directly onto a GL 45 screwthread. For other bottles, use the accompanying adapters for the most common threads in laboratory bottles. Easy to clean and maintain. This instrument is designed for dispensing liquids, observing the following limits: temperature range: +15 to 40 °C of instrument and reagent, vapor pressure up to 500 mbar, density up to 2.2 g/cm³ and the viscosity up to 500 mm²/s. Bottle not included. Warranty 2 years. Each dispenser has been calibrated individually as per EN-ISO 8655. Check the complete table of chemical compatibilities on our website www.labbox.com
More info
Bottle top dispenser, 20K+
Excellent chemical resistance. Made of PTFE, 3.3 borosilicate glass, polypropylene and FEP. High reproducibility of the volumes. The instrument can be screwed directly onto a GL 45 screwthread. For other bottles, use the accompanying adapters for the most common threads in laboratory bottles. Easy to clean and maintain. Fully autoclavable. This instrument is designed for dispensing liquids, observing the following limits: temperature range: +15 to 40 °C of instrument and reagent, vapor pressure up to 500 mbar, density up to 2.2 g/cm³ and the viscosity up to 500 mm²/s. Bottle not included. Warranty 2 years. Each dispenser has been calibrated individually as per EN-ISO 8655.
More info
EASY 9 pipette controller with filter
To fill and dispense liquid in glass and plastic pipettes from 0.1 to 100 ml. Autoclavable silicone pipette holder. Includes an inner 3.0 µm spare part filter to prevent liquid entrance. Warranty 2 years
More info
Micropipette tips, polypropylene, 10 ml Premium Line
High quality tips free of human DNA and certified free from DNase, RNase and PCR inhibitors. Packaged in non-sterile bags. Compatible with EASY and Thermo (A) and with EASY, Gilson, Eppendorf, HTL, Nichiryo, Capp, Sartorius and Ranin (B). Natural color
More info
Micropipette tips, polypropylene, 200 µl Premium Line
Made of 100% virgin polypropylene. Specially designed for PCR and other molecular biology assays. DNase, RNase and Pyrogen-free. Compatible with EASY, Eppendorf, Gilson and Finn micropipettes. Packed in sterile polypropylene racks and bags of 1000 non-sterile tips. Yellow colour. The non-sterile references can be autoclaved. Certificate of sterilization included (to be downloaded here)
More info
Micropipette tips, polypropylene, 300 µl Premium Line
High quality tips with graduation lines of 10, 100 and 200 µl serving as a visual reference to minimize errors during sample aspiration. Human DNA-free and certified free from DNase, RNase and PCR inhibitors. Compatible with EASY, Gilson, HTL, Biohit, Eppendorf, CAPP, Finnpipette, Rainin, Socorex and Nichiryo micropipettes. Packaged in bags of 1000 non-sterile tips. Natural color
More info
Products 1 to 12 on 16 results