Products

Disposable sampling scoop

In HIPS (High Impact Polystyrene), manufactured in a class 100,000 cleanroom. Individually packed. Ideal for sampling and dispensing. With a sturdy, ergonomic handle to prevent hand contact with the sample. Conforms to FDA CFR 177.1640, EU Regulation 10/2011, EC Regulation 1935/2004 and BSE/TSE free

More info

Flat bottom measuring scoop for solids

Made of polypropylene (PP)

More info

Stainless steel scoop for solids

Made in SS 18/10. Hygienic, crevice free construction and fully welded to the handle. Excellent resistance to corrosion and rounded corners for easy cleaning.

More info

Scoop for solids

Made of HDPE

More info

Photo-bioreactors for algae

Fermenters and bioreactors specially designed for the cultivation and study of algae. A lot of choice of volumes and lighting.

More info

PoolLab 1.0 photometer

For measurement of following parameters: pH [6.5 - 8.4], Chlorine (free/combined/total) [0.00 - 6.00 mg/l], Alkalinity (Acid Capacity) [0 - 300 mg/l], Cyanuric Acid (Stabilizer) [0 - 160 mg/l], Active Oxygen (MPS)* [0.0 - 30.0 mg/l], Bromine** [0.0 - 13.5 mg/l], Chlorine Dioxide** [0.0 - 1 1.4 mg/l], Ozone** [0.0 - 4.0 mg/l], Hydrogen Peroxide* [0.0 - 2.9 mg/l], Hardness (total, calcium)* [0 - 500 mg/l]. Basic Kit PoolLab 1.0 includes: 1 Transparent plastic case, 1 PoolLab 1.0 with Bluetooth 4.0 IP67 waterproof, 1 Light shield, 1 Plastic stirring rod, 3 AAAbatteries, 1 manual, Free access to PoolLab software, Free access to PoolLab app, Free access to PoolLab cloud. Initial reagent pack (Photometer grade): 20 tablets Phenol Red, 20 tablets DPD N° 1, 10 tablets DPD N° 3, 10 tablets Alkalinity-M, 10 tablets CYA-Test. Glycine reagent tablets are not included in the basic kit. Compatible with PRLR.*requires reagent tablets not included in basic kit**requires Glycine reagent tablets if chlorine is present. https://www.youtube.com/watch?v=RPjJASCLCe8

More info

PoolLab 2.0 Photometer

Portable photometer, ideal for pool water analysis. It offers the possibility to measure 24 different parameters (not all reagents included), such as cyanuric acid, chlorine, pH, and others. Thanks to the triple cuvette, it is possible to measure three parameters simultaneously.The basic kit of PoolLab 2.0 photometer (POLP-BK2-001) includes 1 PoolLab 2.0 with large color display, Bluetooth, and WiFi, waterproof IP68, 1 triple measurement cuvette, 1 light shield, 3 plastic stirring rods (white, blue, red), 1 10ml syringe, 3 AA batteries, 1 manual, software/app/cloud, 1 bag, and an initial pack of reagents POLP-RRF-001.The initial reagent pack (POLP-RRF-001), p hotometer grade, includes: 20 tablets phenol red , 20 tablets DPD N° 1, 10 tablets DPD N° 3, 10 tablets alkalinity-M and 10 tablets CYA-test. These reagents allow measuring the following parameters: alkalinity, chlorine (tablet mode), cyanuric acid, pH (tablet mode). The additional reagents that allow for the measurement of other parameters are the references PRLR and POLR

More info

Spare parts for plastic desiccators

For desiccators with knobbed lid (DE1P) and vacuum type desiccators (DE2P)

More info

Polycarbonate vacuum trap

Collecting recipient that prevents contaminants from migrating into the vacuum pump and prevents vapors from being emitted back into the laboratory system. Made of resistant PC plastic. With entrance and exit ports for connecting tubes

More info

Batteries

For office and laboratory equipment

More info

Pestle for porcelain mortar Premium Line

Made of upper grade porcelain

More info

Crucible tongs with heat protection

Made of 410 SS. Robust, with a sturdy heat protector on the handle. Autoclavable

More info