Universal UF ovens

Temperature limitation. : +60, +70, +80, +95, +100, +120, +160, +180, +200 or +250 °C (to be specified when ordering) (A6)

Transparent glass door (4-layer insulating glass) Max temperature +250 °C (B0)

Glass door (4-layer insulating glass, borosilicate) Max temperature +300 °C (B1)

Interior lighting to allow observation of loading (R0)

Indoor socket (compatible only with temperature restricted to max. +60°C) (R3)

Virtually gas-tight interior casing (K2)

Passage of 23 mm internal diameter for the introduction of cables (F0)

Passage of 38 mm internal diameter, closable by flap, (F7)

Passage of 57 mm internal diameter, closable by flap, (F8)

Passage of 100 mm internal diameter, closable by valve, (F9)

4 to 20 mA current interface (0 to +310 °C temperature range) (V3)

Current interface 4 to 20 mA (temperature range 0 to +310 °C), temperature on internally flexible Pt100 probe for external temperature monitoring (1 SingleDISPLAY device maximum; 3 TwinDISPLAY devices maximum) ( V6)

Monitoring of fan speed with heating cut-off and alarm triggering in the event of an anomaly, option only valid for UFplus (V4)

Keyed safety lock (safety lock) (B6)

Opening the door on the left (B8)

Potential-free contact (24 V/2 A) with socket for displaying error messages. (H6)

Programmable process-dependent door locking (only on TwinDISPLAY devices) (D4)

Warning in case of open door (only on TwinDISPLAY devices) (V5)

Portable Pt100 probe, to be freely placed in an interior box or spot measurement on a sample, with socket to be mounted on a panel (H8)

MobileALERT, sending an SMS in the event of a malfunction or triggering of the device alarm (Option H6 required) (C3)

Castor frame (in two parts), height 140 mm (R9)

Air inlet filter (80% retention rate) mounted on the base of the device (for UF/UFplus). Caster frame or support frame absolutely obligatory for models 30 to 260 (R8)

Stainless steel grid, electropolished

Grille, stainless steel, electropolished, reinforced, admissible load 60 kg; from mod. 450 with guide rail and fixing screw (requires option K1). Respect the max. load. of the device

Perforated stainless steel tray

Built-in stainless steel drip tray, 15 mm edge (likely to disrupt the distribution of ambient temperature), cannot be used with option K1

Maximum load per built-in drip tray [kg]

Free-standing stainless steel drip tray, 15 mm edge (likely to disrupt the distribution of ambient temperature), cannot be used with option K1

USB-Ethernet adapter

5m Ethernet cable for connection to computer

USB stick with user ID (user ID): User license on USB stick for a defined device to prevent unauthorized intervention by third parties. Device number to be specified for any subsequent order (only for TwinDISPLAY devices).

Height adjustable feet (4 units)

Accessories (4 pieces) for stacking devices of the same dimensions

Straight chimney extension for air exhaust (60.3 mm outer diameter, 57 mm inner diameter), connection to a pipe if applicable

Angled chimney extension for air exhaust (60.3 mm outer diameter, 57 mm inner diameter), connection to a pipe if necessary. Available only with U, I and S devices

Leveling bracket (models 30 to 75: height 600 mm, models 110 to 450: height 500 mm)

Mobile support (models 30 to 75: height 660 mm, models 110 to 160: height 560 mm)

Leveling bracket, height 130 mm

FDA-compliant software “AtmoCONTROL FDA-Edition”. Meets the requirements for the use of electronic data blocks in memory and for electronic signatures, defined in the Guidelines 21 CFR part 11 of the US Food and Drug Administration (FDA). Basic license for controlling a device (compatible with TwinDISPLAY devices only). IQ/OQ document available in German and English (without surcharge)

Calibration in the Memmert factory for one or more freely selectable temperature values

DQ/IQ/OQ/PQ qualification