Enceintes hygrométriques HCP

La régulation hygrométrique active crée un environnement contrôlé pour les essais accélérés de durée de vie et les essais 85/85.
Plus d'informations

Partager

La gamme

HCP50

Dim. ext. (L x H x P)

559x795x521 mm

Température

+18 à +90°C

Humidité

20 à 95%

Volume (L)

56

Fiche technique

HCP105

Dim. ext. (L x H x P)

719x850x591 mm

Température

+18 à +90°C

Humidité

20 à 95%

Volume (L)

107

Fiche technique

HCP150

Dim. ext. (L x H x P)

719x1070x591 mm

Température

+18 à +90°C

Humidité

20 à 95%

Volume (L)

156

Fiche technique

HCP240

Dim. ext. (L x H x P)

759x1180x691 mm

Température

+18 à +90°C

Humidité

20 à 95%

Volume (L)

241

Fiche technique

  • User-friendly and intuitive to use

  • Programming temperature/humidity ramps using AtmoCONTROL software

  • Inner casing and outer wall made almost exclusively from high-quality, corrosion-resistant and easy-to-maintain stainless steel.

  • Heating concept specifically tailored to the product for precise and consistent thermal control

  • Extensive programming and documentation options using interfaces, built-in state logging and AtmoCONTROL software

  • 3 years warranty (worldwide)

  • ControlCOCKPIT with battery buffer: The entire display device (ControlCOCKPIT) is protected against power outages by an internal safety power supply. It is therefore independent from the sector and allows the monitoring and entry of the values of all parameters in all circumstances. (C2)

  • Passage of 23 mm internal diameter for the introduction of cables, closable by flap, standard left positioning - middle/top (F1)

  • Current interface 4 – 20 mA, regulator temperature reading (0 to +100 °C = 4 – 20 mA) (V3)

  • Current interface 4 – 20 mA, humidity reading (0 to 100% rh = 4 – 20 mA) (V7)

  • Keyed safety lock (safety lock) (B6)

  • Potential-free contact (24 V/2 A) with socket for displaying error messages (ALARM in case of power failure, sensor malfunction, fuse problem) (H6)

  • MobileALERT, sending an SMS in the event of a malfunction or triggering of the device alarm (Option H6 required) (C3)

  • MobileALERT for sending 2 alarm messages; transmission of an SMS message. alarm for temperature and humidity (Option H6 required) (C4)

  • Perforated stainless steel tray

  • Stainless steel grid, electropolished

  • Central water supply with filter cartridges for connection to the drinking water network. Product information on request

  • Central water supply without filter cartridges for connection to the drinking water network (the device only uses demineralized/totally desalinated water with a conductivity of 5 to 10 μS/cm and a pH between 5 and 7) . Product information on request

  • USB-Ethernet adapter

  • 5 m Ethernet connection cable for computer interface

  • USB stick with user ID (user ID): User license on USB stick for a defined device to prevent unauthorized intervention by third parties. Device number to be specified for any subsequent order (only for TwinDISPLAY devices).

  • Accessories (4 pieces) for stacking devices of the same dimensions

  • Support frame (height 622 mm) leveling screw (for mod. 150/240: not compatible with two devices stacked on top of each other)

  • Support frame (height 130 mm); for mod. 150/240: only in combination with the corresponding stacking kit for stacked devices

  • FDA-compliant software “AtmoCONTROL FDA-Edition”. Meets the requirements for the use of electronic data blocks in memory and for electronic signatures, defined in the Guidelines 21 CFR part 11 of the US Food and Drug Administration (FDA). Basic license for controlling a device (compatible with TwinDISPLAY devices only). IQ/OQ document available in German and English (without surcharge)

  • FDA inclusion of an additional device (max. 31) in a pre-existing FDA license (compatible with TwinDISPLAY devices only)

  • External measuring device with probes and additional measuring head for temperature and humidity. Product information on request (models HPPeco, ICHeco/ICH, ICHLeco/ICH, IPPecoplus and ICOmed)

  • One year warranty extension

  • Calibration in the Memmert factory for one or more freely selectable temperature and humidity values

DQ/IQ/OQ/PQ qualification