<>Blanc-Labo S.A. your laboratory equipment specialist
Vertical autoclaves Type LVSA
Zirbus has been manufacturing a very wide range of autoclaves of all sizes for over 35 years.
Designed around a bank of proven components, Zirbus autoclaves are fully configurable according to your needs, while remaining affordable. They are entirely manufactured in Germany in the vertically integrated Bad-Grund manufacturing unit.
It is this German quality, tailor-made, at a reasonable price, which has made Zirbus’ reputation.
Zirbus products are delivered, according to your needs, with all the documentation and qualification and validation operations requested by your type of industry (pharmacy, medical, laboratories, etc.): GMP, FDA, etc.
Blanc-Labo SA has been installing and maintaining Zirbus equipment for 30 years.
Share
The range
| Model | Chamber Vol. (L) | Diam. int. (Ø x H) | Power (W) | Loading height | Dimensions (mm) | Technical sheet | Price | Cart |
|---|---|---|---|---|---|---|---|---|
| LVSA 40/60 | 80 | 400 x 620 mm | 6000 | 760 | 550 x 850 |
|
|
|
| LVSA 40/75 | 96 | 400 x 770 mm | 6000 | 900 | 550 x 850 |
|
|
|
| LVSA 50/60 | 133 | 500 x 680 mm | 9000 | 800 | 700 x 950 |
|
|
|
| LVSA 50/70 | 153 | 500 x 780 mm | 9000 | 900 | 700 x 950 |
|
|
|
LVSA 40/60
Chamber Vol. (L)
Diam. int. (Ø x H)
Power (W)
Loading height
Dimensions (mm)
Technical sheet
LVSA 40/75
Chamber Vol. (L)
Diam. int. (Ø x H)
Power (W)
Loading height
Dimensions (mm)
Technical sheet
LVSA 50/60
Chamber Vol. (L)
Diam. int. (Ø x H)
Power (W)
Loading height
Dimensions (mm)
Technical sheet
LVSA 50/70
Chamber Vol. (L)
Diam. int. (Ø x H)
Power (W)
Loading height
Dimensions (mm)
Technical sheet
German manufacturing
All stainless steel for greater durability and easy cleaning
Ergonomic loading height of 750mm
Water-saving rapid cooling
Electric arm for easy loading and unloading
7 versions and many options to meet your needs
In particular GMP versions
Qualification IQ,OQ,PQ
Spare parts are available for 10 years
You can configure your LVSA autoclave on this link
The autoclave is equipped with a fully automatic vertical door.
Low maintenance.
Maximum security.
Saving space in your lab
Ecran tactile 10"
The 7" touch screen allows control of the autoclave from the front panel.
This screen contains a PC which communicates control information to the PLC. The software is very comprehensive and easy to use. The data from each batch is stored in the autoclave and can either be printed or sent via the Ethernet port to a PC in .pdf or .csv format for archiving and/or analysis.
Steam generator
Steam generator
All LVSA models are equipped with a compact steam generator integrated into the autoclave body. It works with demineralized water to avoid the formation of non-condensable gases in the chamber.
Internal brewing fan - rapid cooling
To shorten the cooling time, this fan circulates the air inside the chamber to bring it into contact with the walls which are cooled by the double mantle.
This option saves cooling water and ensures much better homogeneity in the chamber. Essential to avoid overflows (AGAR in particular).
LVSA 50/70 avec bras de levage
Electric lifting arm
This lifting arm can lift up to 23kgs. It will save you a lot of back pain and tendinitis during the 20 years of operation of your autoclave.
Flexible probe for liquid cycles
The LVSAs are all equipped with a flexible probe for liquid programs (and probe calibration).
High-performance liquid ring vacuum pump
A liquid ring vacuum pump allows you to completely remove the air contained in your products and replace them with sterilizing steam. You can choose between these "pre-vacuums" in one step (for liquids and glassware) or with successive pre-vacuums configurable by the user (for waste and instruments).
Front thermal printer
A thermal printer can be added as an option on the front panel.
BASIC LAB version: recommended for simple needs. Sterilization of liquids or solids without drying. Equipment: steam generator and automaton with SteriTouch Control software
DRY LAB version: recommended for the sterilization of solids (waste, instruments) with imperative drying. Equipment: steam generator, automaton with SteriTouch Control software, vacuum pump
QUICK LAB BASIC version: recommended for sterilizing liquids with rapid cooling. Equipment: steam generator, automaton with SteriTouch Control software, cooling with internal mixing fan.
QUICK LAB version: recommended for the sterilization of non-infectious solids (waste, instruments) and liquids with imperative drying and rapid cooling. Equipment: steam generator, automaton with SteriTouch Control software, vacuum pump, internal mixing fan
QUICK LAB ADVANCED version: recommended for the sterilization of non-infectious solids (waste, instruments) and liquids with imperative drying and rapid cooling. Suitable for agars and liquids in closed containers to avoid spillage during cooling. Equipment: steam generator, automaton with SteriTouch Control software, vacuum pump, internal mixing fan, back pressure with air-steam mixture
SAFE LAB version: recommended for the sterilization of INFECTIOUS solids (waste, instruments) of type S2, with imperative drying. Equipment: steam generator, automaton with SteriTouch Control software, vacuum pump, ALF filter on the air outlet
COMPLETE LAB version: recommended for the sterilization of solids (waste, instruments) and INFECTIOUS liquids of type S2, with imperative drying and rapid cooling. Equipment: steam generator, automaton with SteriTouch Control software, vacuum pump, internal circulation fan", ALF filter on the air outlet
Stainless steel sterilisation baskets, pails and containers
Front thermal printer
Lifting and pivoting mechanism Vidéo -->
Validation DQ,FAT,IQ,OQ,PQ,SAT Qualification