<>Blanc-Labo S.A. your laboratory equipment specialist
HPPeco constant climate enclosures
Energy efficiency and precision in a new dimension
This high-performance climate speaker equipped with Advanced Peltier Technology has more than earned the eco label. In continuous operation, it is approximately 90% more energy efficient than compressor-cooled units, requires no refrigerant and is therefore virtually maintenance-free. Temperature regulation from +0°C to +70°C as well as humidification and dehumidification from 19% to 90% rh in HPPeco are ideally suited to the requirements of stability testing of pharmaceutical products (Q1A). Thanks to its quiet operation, the compact climate chamber is also suitable for breeding insects or zebrafish.
Temperature range from +0°C to +70°C
7 model sizes (internal volumes from 108 to 2140 liters)
Only one version: TwinDISPLAY
Active humidification and dehumidification with digital regulation from 10 to 90%
Insulated stainless steel exterior doors, glass interior as standard: prevention of the risk of infection, as well as a drop or rise in temperature, and optimal visibility of the sensitive loading element thanks to the fully glazed interior wall of the doors (mod. 1400 /2200 stainless steel doors with glass cutout; 2 leaves on models 750, 1060 and 1400, 3 leaves on models 2200)
Share
The range
| Model | Dim. ext. (L x H x D) | Temperature | Humidité | Capacity | Technical sheet | Price | Cart |
|---|---|---|---|---|---|---|---|
| HPP110eco | 745x864x555 mm | 0 à +70°C | 10 à 90% | 108 |
|
|
|
| HPP260eco | 824x1183x655 mm | 0 à +70°C | 10 à 90% | 256 |
|
|
|
| HPP410eco | 824x1720x655 mm | 0 à +70°C | 10 à 90% | 384 |
|
|
|
| HPP750eco | 1224x1720x755 mm | 0 à +70°C | 10 à 90% | 749 |
|
|
|
| HPP1060eco | 1224x1720x1005 mm | 0 à +70°C | 10 à 90% | 1060 |
|
|
|
| HPP1400eco | 1435x1913x905 mm | 0 à +70°C | 10 à 80% | 1360 |
|
|
|
| HPP2200eco | 2157x1913x905 mm | 0 à +70°C | 10 à 80% | 2140 |
|
|
|
HPP110eco
Dim. ext. (L x H x D)
Temperature
Humidité
Capacity
Technical sheet
HPP260eco
Dim. ext. (L x H x D)
Temperature
Humidité
Capacity
Technical sheet
HPP410eco
Dim. ext. (L x H x D)
Temperature
Humidité
Capacity
Technical sheet
HPP750eco
Dim. ext. (L x H x D)
Temperature
Humidité
Capacity
Technical sheet
HPP1060eco
Dim. ext. (L x H x D)
Temperature
Humidité
Capacity
Technical sheet
HPP1400eco
Dim. ext. (L x H x D)
Temperature
Humidité
Capacity
Technical sheet
HPP2200eco
Dim. ext. (L x H x D)
Temperature
Humidité
Capacity
Technical sheet
User-friendly and intuitive to use
Programming temperature/humidity ramps using AtmoCONTROL software
Inner casing and outer wall made almost exclusively from high-quality, corrosion-resistant and easy-to-maintain stainless steel.
Heating concept specifically tailored to the product for precise and consistent thermal control
Extensive programming and documentation options using interfaces, built-in state logging and AtmoCONTROL software
3 years warranty (worldwide)
Temperature limitation, temperature: +60 °C (A8)
Interior box modification for use of reinforced perforated stainless steel trays or reinforced stainless steel grids (support slides mounted in the box) - includes delivery of reinforced grids to replace standard grids (standard for 1060 models) (K1)
6,500 K cool-white lighting module, LED strips fixed against side walls, 10 on mod. 110, 14 on mod. 260/410/750, (programmable attenuation from 0 – 100% in 1% steps). Programming of ramps, depending on temperature and humidity; do not use in combination with F6 (T7)
Cool white 6,500 K, warm white 2,700 K lighting module, LED strips, 10 models 110, 14 models 260/410/750, alternating 5 or 7 cool white and 5 or 7 warm white, fixed to side walls ; (programmable attenuation from 0 – 100% in steps of 1%). Programming of ramps based on temperature and humidity; do not use in combination with F6 (T8)
2,700 K warm-white lighting module, LED strips fixed against side walls, 10 on mod. 110, 14 on mod. 260/410/750, programmable attenuation from 0 – 100% in 1% steps. Programming of ramps, depending on temperature and humidity; do not use in combination with F6 (T9)
Indoor socket (only available for restricted temperature range up to +60°C maximum), permissible load 230V/2.2A/500W, switching by main switch, no separate switch, moisture-proof IP68 (requires option A8 against overload) (R3)
Passage of 23 mm internal diameter for the lateral introduction of cables, moisture-tight, closable by flap and silicone plug, standard positioning on the left - middle/middle (F0)
Passage (silicone), internal diameter. 40 mm, moisture-proof, sealed with silicone plug; on rear wall, positions to be specified (F7)
Current interface 4 to 20 mA (temperature range -10 to +80°C equivalent to 4 to 20 mA), actual value of temperature controller (V3)
Compressed air drying (powerful dehumidification of the interior box by introducing compressed air). Standard factory calibration certificate (measuring point in the center of the usable space) for +10°C with 10% rh (C9)
Keyed safety lock (safety lock) (B6)
Potential-free contact (24 V/2 A) with socket for displaying error messages (ALARM in case of power failure, sensor malfunction, fuse problem) (H6)
Programmable process-dependent door locking (only on TwinDISPLAY devices) (D4)
Warning in case of open door (only on TwinDISPLAY devices) (V5)
MobileALERT, sending an SMS in the event of a malfunction or triggering of the device alarm (Option H6 required) (C3)
MobileALERT for sending 2 alarm messages; transmission of an SMS message. alarm for temperature and humidity (Option H6 required) (C4)
Stainless steel grill, electropolished
Reinforced stainless steel grid, electropolished, admissible load up to 60 kg (model 750 with guide rail and fixing screws, usable only with option K1) Observe the max. load. of the device
Perforated stainless steel tray
Reinforced perforated stainless steel platform, load capacity up to 60 kg, with guide rail and fixing screws, can only be used with option K1
Built-in stainless steel drip tray, 15 mm edge (likely to disrupt the distribution of ambient temperature), cannot be used with option K1
Non-perforated stainless steel tray, rim height of 15 mm, with guide rail and fixing screw (likely to disrupt temperature uniformity) – usable only with option K1
Central water supply with filter cartridges for connection to the drinking water network. Product information on request
Central water supply without filter cartridges for connection to the drinking water network (the device only uses demineralized/totally desalinated water with a conductivity of 5 to 10 μS/cm and a pH between 5 and 7) . Product information on request
USB-Ethernet adapter
5m Ethernet cable for connection to computer
USB stick with user ID (user ID): User license on USB stick for a defined device to prevent unauthorized intervention by third parties. Device number to be specified for any subsequent order (only for TwinDISPLAY devices).
FDA-compliant software “AtmoCONTROL FDA-Edition”. Meets the requirements for the use of electronic data blocks in memory and for electronic signatures, defined in the Guidelines 21 CFR part 11 of the US Food and Drug Administration (FDA). Basic license for controlling a device (compatible with TwinDISPLAY devices only). IQ/OQ document available in German and English (without surcharge)