pH and conductivity

Multiparameter tester, PC5 series

A single compact device to mesure pH, mV, conductivity, TDS, salinity and temperature. With interchangeable probe. pH range: -2 ... 16,00 pH, accuracy ±0.01 pH and 1...3 points calibration. mV (redox) mesuring range: ±500. Conductivity range: 0 - 200 μS/cm, 0 - 2000 μS/cm, 0 - 20,00 mS/cm, accuracy: ±0.5 % (value reading) and 1...3 points calibration. Temperature range: 0 - 50 ºC, accuracy ±0.2 ºC. TDS range: 0,1 mg/L - 10 g/L, accuracy: 0,5 % (value reading). Salinity range: 0,01 - 10 ppt. Water-tight, IP 67. Includes: MPMT-A05-001 electrode. Warranty 2 years. Delivery 1 week

More info

Universal pH test papers, roll

Universal pH test paper in rolls 5 m long and 7 mm wide. Each roll is stored in a plastic dispenser with a printed color scale with pH intervals of 1

More info

Litmus paper strips

Basic indicator paper when a precise pH value is not needed. Blue litmus paper turns to red when a solution goes from basic to acidic while red litmus paper turns to blue when a solution goes from acidic to basic. Neutral litmus paper turns to blue when going to basic and red when going to acid. Each plastic box contains 10 booklets with 20 paper strips each

More info

Conservation electrode solutions LABKEM

Electrolyte solutions for the conservation of the electrode, regeneration of the electrode and enzymatic cleaning solution for the membrane electrode

More info

LABKEM conductivity solution

Tolerance ±1% of the declared value. Certificates traceable to SRM from NIST. With variation table of conductivity / temperature on the label. Use within 12 months of opening (6 months for COSS-10U-500)

More info

LABKEM pH buffer solution with measuring chamber

Bottle with a separate measuring chamber, "twin-neck". No other containers are required during the calibration process and subsequent cleaning thereof, preserving the purity of the buffer solution. Colored solutions to prevent mistakes. Certificates traceable to SRM from NIST. Variation table of pH / temperature on the label. Use within 12-15 months of opening

More info

Plastic body dual pH electrode with ATC probe, general use

Plastic body (epoxy), specially designed for general use. Reference element Ag/AgCI, gel non refillable electrolyte and porous teflon diaphragm. pH range 0 - 14, maximum service temperature 100°C. Dimensions: 120 x 12 mm. Available with BNC connection and 1 m cable, and two types of ATC probe connections: 10K/3.5mm Jack for METRIA meters and 30K/CINCH for XS, Mettler-Toledo, FISHER and VWR meters

More info

Glass body dual pH electrode with ATC probe, intensive use

For general laboratory uses and measurements that require greater precision in liquids and non-aqueous solutions, aggressive samples. Resists poisoning and fouling. Reference element Ag/AgCI, non refillable electrolyte and porous teflon diaphragm. pH range 0 - 14, maximum service temperature 130 °C. Dimensions: 120 x 12 mm. Available with BNC connection and 1 m cable, and two types of ATC probe connections: 10K/3.5mm Jack for METRIA meters and 30K/CINCH for XS and Mettler-Toledo

More info

Conductivity electrodes

Conductivity electrodes with temperature compensation to be used with COMT-M51-001 or COMT-M52-001. Dimensions 120 x 12 mm, BNC conection with 1 m cable length. K = 1: conductivity values (0 - 150 mS/cm), temperature range (0 - 100°C). General purpose, plate material: platinum K = 10: conductivity values (0 - 500 mS/cm), temperature range (0 - 100°C). For high conductivity solutions, plate material: carbon K = 0,1: conductivity values (0 - 500 µS/cm), temperature range (0 - 50°C). For pure water, plate material: platinum

More info

Epoxy body pH electrode, dificult samples

Specially designed for measuring difficult samples: dairy products, viscose samples, creams, surface measurements (paper, Agar, skin, ...). Reference element Ag/AgCI, partial gel refillable electrolyte (3.5M KCl/AgCl) and teflon diaphragm. pH range 0 ... 14, maximum service temperature 80 ºC. Dimensions: 120 x 12 mmAvailable with two types of connections: BNC connector with fixed cable (length: 1 m) or S7 connector (delivery without connecting cable, please order separately)

More info

Epoxy body pH electrode for educational use, Basic Line

Specially designed for educational market, combining quality at an affordable price. Minimum maintenance, less frequent calibrations and greater stability. Plastic body (epoxy). Reference element Ag/AgCI, gel non refillable electrolyte and fiber diaphragm. pH range 0 ... 14, maximum service temperature 60 ºC. Dimensions: 120 x 12 mm. Fixed cable 1 m long with BNC connector

More info

Epoxy body pH electrode, general use

Plastic body (epoxy), specially designed for general use in portable pH meters. Reference element Ag/AgCI, gel non refillable electrolyte and porous teflon diaphragm. pH range 0 ... 14, maximum service temperature 80 ºC. Dimensions: 120 x 12 mm. Available with two types of connections: BNC connector with fixed cable (length: 1 m) or S7 connector (delivery without connecting cable, please order separately)

More info