Products

Electronic pipette filling device EASY 60β

Ergonomic and lightweight design, easy to handle with one hand. For easy, secure and efficient liquid filling and delivery. Can be used with glass or plastic pipettes from 0.1 to 100 ml. Autoclavable hydrophobic 0.45 μm filter preventing excess aspiration. Warranty 2 years

More info

Transfer tank

Used for the transfer of proteins from polyacrylamide gels. Colour code to ensure correct orientation of the gel during transfer. Includes 2 polycarbonate cassettes with perforated plates and 4 pads. Compatible with ELFV-750-001

More info

Kjeldahl automatic distiller, KJD20

Fully intelligent software that can complete sample distillation within minutes. Automatic addition of NaOH, H₂O and H₃BO₃ . Automatic reagent quantification and filling. Automatic cleaning system that further enhances measurement precision. Easy to operate interface. Measuring range: 0,1 mg – 240 mg N. Recovery ≥ 99,5%. Sample capacity: 6 g/sample (solid) or 16 ml/sample (liquid). Distillation speed: 3-6 min/sample. 4,3 inch LCD color screen. Manual and automatic operation modes. Automatic alkali pipeline washing function. Automatic or manual filling mode. Programmable distillation time with automatic alarm upon completion. Emergency stop, automatic fault detection, over temperature protection, over pressure protection and intelligent audible and visual alarm system. Calibration function: dilution water calibration, alkali solution calibration, boric acid solution calibration and washing flow calibration. Safety door, digestion tube and cooling water condition displayed at real time when running. Built in testing model to detect the current condition of most functions. It is recommended to combine with the DTU3-042-*** digestion tubes (10 tubes included). Power: 1300 W. 220 V ± 10%, 50 Hz. Warranty 1 year

More info

Gloves dispenser wall mount

Made of 18/8 stainless steel. With the sides open to facilitate the replacement of the consumable, ready to fix on the wall (Ø 6 mm holes, screws not included)

More info

Gloves dispenser

With lid and oval opening for dispensing, in 18/8 stainless steel

More info

Microscope slide dispenser

ABS body with transparent PS cover. Suitable for slides of 75 x 25 mm length and 1,0 - 1,2 mm thickness

More info

QuickFix UNO dispenser

Dispenser with 45 elastic and comfortable textile plasters. The small dimensions allow attachment to almost any desired location either by screwing it to the wall or fixating it with adhesive strips

More info

Test tube dispenser

Iron material with transparent front panel in acrylic material. Can hold directly test tubes boxes references TU02, TU04, TU05 y STUN

More info

Parafilm M dispenser

Used for storing, dispensing and cutting Parafilm®M. Made of white acrylic. Can hold both 5 cm and 10 cm rolls, tapes and labels. Can easily cut thanks to super sharp serrated blades. Openable top lid allows easy replacement of the paraflim rolls. The dispenser does not include Parafilm

More info

Paper roll holder

Roll holder in lacquered steel and ABS. The top blade facilitates the cutting of the paper. Compatible with industrial paper rolls up to 31 centimetres wide

More info

EASY 20R bottle top dispenser with recirculation

Excellent chemical resistance. Made of borosilicate glass and and high chemical resistance materials. High reproducibility of the measurements. Re-circulable valve that prevents liquid leaks. Security lock. Includes calibration tool and 4 universal adapters for bottles. Easy to clean and maintain due to a springless valve design. This instrument is designed for dispensing liquids, under the following conditions of use: temperature range: 15 to 40 °C (instrument and reagent), vapor pressure up to 500 mbar, density up to 2.2 g/cm³ and viscosity up to 500 mm²/s. Warranty 2 years. Each dispenser has been calibrated individually as per EN-ISO 8655. It has a unique serial number engraved and is delivered with a calibration certificate. Check the complete table of chemical compatibilities on our website www.labbox.com

More info

Bottle top dispenser , 20K

Good chemical resistance. Made of PTFE, 3.3 borosilicate glass, polypropylene and FEP. High reproducibility of the volumes. The instrument can be screwed directly onto a GL 45 screwthread. For other bottles, use the accompanying adapters for the most common threads in laboratory bottles. Easy to clean and maintain. This instrument is designed for dispensing liquids, observing the following limits: temperature range: +15 to 40 °C of instrument and reagent, vapor pressure up to 500 mbar, density up to 2.2 g/cm³ and the viscosity up to 500 mm²/s. Bottle not included. Warranty 2 years. Each dispenser has been calibrated individually as per EN-ISO 8655. Check the complete table of chemical compatibilities on our website www.labbox.com

More info